UK Regional Settings for OBihai Devices

#1
What are the UK regional settings for OBihia adaptors and telephones?

As taken from here: http://www.ukvoipforums.co.uk/viewtopic ... p=250#p250

If you have purchased an OBihai SIP adaptor or telephone it will come configured for the US telecom system as standard. This means they will have US style tones, sounds and that some UK phone features may not work correctly unless we make some configuration changes in the settings menu of the device.

First you will need to login to your OBihai SIP adaptor or telephone's web based GUI by typing the IP address of the device into your web browser. (There is no need to enter "http://" before the IP address.) If prompted enter the username and password to complete the process, you should now have access to the devices Web based GUI, from here you can configure and setup your device for use with your VoIP provider.

---

Below you will find the correct regional configuration settings for use in the UK, You may need to be logged in with administrator privileges to view and change these settings.

Router Configuration ---> WAN Settings

Code: Select all

System Management:
LocalTimeZone: GMT+00:00(London,Lisbon)
DaylightSavingTimeStart: 3/-1/7/2:0:0
DaylightSavingTimeEnd: 10/-1/7/2:0:0
DaylightSavingTimeDiff: 1:0:0
Physical Interfaces ---> PHONE1+2 Port

Code: Select all

Ringer:
RingFrequency: 25

Port Settings:
OnHookTipRingVoltage: 50
OffHookCurrentMax: 25
Impedance: 370+(620||310 nF)
CallerIDMethod: FSK(V.23)

Timers:
HookFlashTimeMax: 200
HookFlashTimeMin: 60
CPCDuration: 90
DigitMapLongTimer: 6 <--- Optional, this is more of a personal choice of mine. Leave at default value if you wish!
Physical Interfaces ---> LINE Port

Code: Select all

Line Port:
RingDelay: 400

PSTN Disconnect Detection:
DetectCPC: Yes
CPCTimeThreshold: 0.09
DetectPolarityReversal: No
DetectFarEndLongSilence: Yes
SilenceDetectSensitivity: High
SilenceTimeThreshold: 30
DetectDisconnectTone: Yes
DisconnectTonePattern: 400-30;20

Port Settings:
ACImpedance: 370+620||310nF
OnHookSpeed: 3ms (ETSI)
CurrentLimitingEnable: Yes
CallerIDDetectMethod: ETSI FSK With PR(UK)

Ring Detection:	
RingFrequencyMin: 10
RingFrequencyMax: 100
RingThreshold: 13.50-16.50
RingValidationTime: 256
RingIndicationDelayTime: 0
RingTimeout: 128
RingerImpedance: High
Tone Settings ---> Tone Profile A+B

Code: Select all

Dial Tone:
ToneName: Dial Tone
TonePattern: 350-19,440-22;10

Ringback Tone:
ToneName: Ringback Tone	
TonePattern: 400-20,450-20;-1;(.4+.2,.4+2)

Busy Tone:
ToneName: Busy Tone
TonePattern: 400-20;10;(.375+.375)

Reorder Tone:
ToneName: Reorder or Fastbusy Tone
TonePattern: 400-20;10

Holding Tone:
ToneName: Holding Tone
TonePattern: 600-20;-1;(.1+.1,.1+.1,.1+2.2)

Second Dial Tone:
ToneName: Second Dial Tone
TonePattern: 420-19,520-22;10

Stutter Tone:
ToneName: Stutter Tone
TonePattern: 350-19,440-22;10;(.75+.75)

Howling Tone:
ToneName: Howling Tone
TonePattern: 480+3,620+3;300;(1/.2+0,2/.2+0)

Prompt Tone:
ToneName: Prompt Tone
TonePattern: 520-19,620-22;10

Call Forwarded Dial Tone:
ToneName: Call Forwarded Dial Tone	
TonePattern: 350-19,440-22;10;(.75+.75)

DND Dial Tone:
ToneName: DND Dial Tone
TonePattern: 350-19,440-22;10;(.75+.75)

Conference Tone:
ToneName: Conference Tone
TonePattern: 350-22;10;(.1+.1,.1+9.7)

SIT Tone 1:
ToneName: SIT Tone 1
TonePattern: 950-16,1400-16,1800-16;20;(1/.330+0,2/.330+0,4/.330+0,0/0+4)

Outside Dial Tone:
ToneName: Outside Dial Tone
TonePattern: 420-22;10
Ring Settings ---> Ring Profiles A+B

Code: Select all

Call Waiting Tone 1:
ToneName: UK-1
TonePattern:30;(.1+2)

Call Waiting Tone 2:
ToneName: UK-2
TonePattern: 30;(.25+.25,.25+.25,.25+5)

Ring Pattern 1:
RingName: UK-1
RingPattern: 60;(.4+.2,.4+2)

Ring Pattern 2:
RingName: UK-2
RingPattern: 60;(1+2)

Ring Pattern 3:
RingName: UK-3
RingPattern: 60;(.25+.25,.25+.25,.25+1.75)

Ring Pattern 4:
RingName: UK-4
RingPattern: 60;(.4+.8)

Ring Pattern 5:
RingName: UK-5
RingPattern: 60;(2+4)
For everything VoIP
www.ukvoipforums.com

Who is online

Users browsing this forum: Majestic-12 [Bot] and 0 guests

Copyright 2004 - 2017, iNet Telecoms® Ltd. All rights reserved.


cron