Howdy,

Does anybody have a recommended config file for a cisco 7960. I have been trying and trying to get mine to work properly for monthly. Sometimes it works great then the other times you can't get it to place a call. I think it is something about the timers in the phone, but I want to rule out the config file (SIPDefault) and the correct firewall settings for the router - particularly around the section which specifies how this works in the config file.

Sipgate posted a config file - but does anyone have one here that they have used and works. If posting, be sure to remove any personal info.

Thanks a million

Matt

This is the SIP{MAC}.cnf

# SIP Configuration Generic File (start)



# Line 1 Settings

line1_name: "30XXXXXX" ; Line 1 Extension\User ID

line1_displayname: "Joe Doe" ; Line 1 Display Name

line1_authname: "30XXXXXX" ; Line 1 Registration Authentication

line1_password: "123456" ; Line 1 Registration Password

line1_shortname: Joe Doe



# Line 2 Settings

line2_name: "" ; Line 2 Extension\User ID

line2_displayname: "" ; Line 2 Display Name

line2_authname: "UNPROVISIONED" ; Line 2 Registration Authentication

line2_password: "UNPROVISIONED" ; Line 2 Registration Password


line2_shortname:



# Line 3 Settings

line3_name: "" ; Line 3 Extension\User ID

line3_displayname: "" ; Line 3 Display Name

line3_authname: "UNPROVISIONED" ; Line 3 Registration Authentication

line3_password: "UNPROVISIONED" ; Line 3 Registration Password



# Line 4 Settings

line4_name: "" ; Line 4 Extension\User ID

line4_displayname: "" ; Line 4 Display Name

line4_authname: "UNPROVISIONED" ; Line 4 Registration Authentication

line4_password: "UNPROVISIONED" ; Line 4 Registration Password



# Line 5 Settings

line5_name: "" ; Line 5 Extension\User ID

line5_displayname: "" ; Line 5 Display Name

line5_authname: "UNPROVISIONED" ; Line 5 Registration Authentication

line5_password: "UNPROVISIONED" ; Line 5 Registration Password



# Line 6 Settings

line6_name: "" ; Line 6 Extension\User ID

line6_displayname: "" ; Line 6 Display Name

line6_authname: "UNPROVISIONED" ; Line 6 Registration Authentication

line6_password: "UNPROVISIONED" ; Line 6 Registration Password



# Phone Label (Text desired to be displayed in upper right corner)

phone_label: "VOIPFONE" ; Has no effect on SIP messaging

#messages_uri: "1571"
#mwi_status : "1"

# Emergency Proxy info

proxy_emergency: ""

proxy_emergency_port: ""



# Backup Proxy info

proxy_backup: ""

proxy_backup_port: ""



# Outbound Proxy info

outbound_proxy: "sip.voipfone.co.uk"

outbound_proxy_port: "5060"

proxy_register : 1

# NAT/Firewall Traversal

nat_enable: "1"

nat_address: "nat.voipfone.co.uk"

voip_control_port: "5065"

start_media_port: "16384"

end_media_port: "32766"

nat_received_processing: "0"



# Time Zone phone will reside in

time_zone: GMT



# Phone prompt/password for telnet/console session

phone_prompt: "Cisco7960" ; Telnet/Console Prompt

phone_password: "cisco" ; Telnet/Console Password



# SIP Configuration Generic File (stop)


-------------------------------------------------------------------------------------
This is the SIPDefault.cnf

# Image Version

image_version: "P0S3-07-5-00"



# Proxy Server

proxy1_address: "sip.voipfone.co.uk"



# Proxy Server Port (default - 5060)

proxy1_port:"5060"



# Emergency Proxy info

proxy_emergency: ""

proxy_emergency_port: ""



# Backup Proxy info

proxy_backup: ""

proxy_backup_port: ""



# Outbound Proxy info

outbound_proxy: "voipfone.co.uk"

outbound_proxy_port: "5065"



# NAT/Firewall Traversal

nat_enable: "1"

nat_address: ""

voip_control_port: "5060"

start_media_port: "16384"

end_media_port: "32766"

nat_received_processing: "0"



# Proxy Registration (0-disable (default), 1-enable)

proxy_register: "0"



# Phone Registration Expiration [1-3932100 sec] (Default - 3600)

timer_register_expires: "60"



# Codec for media stream (g711ulaw (default), g711alaw, g729)

preferred_codec: "g711alaw"



# TOS bits in media stream [0-5] (Default - 5)

tos_media: "5"



# Enable VAD (0-disable (default), 1-enable)

enable_vad: "0"



# Allow for the bridge on a 3way call to join remaining parties upon hangup

cnf_join_enable: "1" ; 0-Disabled, 1-Enabled (default)



# Allow Transfer to be completed while target phone is still ringing

semi_attended_transfer: "0" ; 0-Disabled, 1-Enabled (default)



# Telnet Level (enable or disable the ability to telnet into this phone

telnet_level: "2" ; 0-Disabled (default), 1-Enabled, 2-Privileged



# Inband DTMF Settings (0-disable, 1-enable (default))

dtmf_inband: "1"



# Out of band DTMF Settings (none-disable, avt-avt enable (default), avt_always - always avt )

dtmf_outofband: "avt"



# DTMF dB Level Settings (1-6dB down, 2-3db down, 3-nominal (default), 4-3db up, 5-6dB up)

dtmf_db_level: "3"



# SIP Timers

timer_t1: "500" ; Default 500 msec

timer_t2: "4000" ; Default 4 sec

sip_retx: "10" ; Default 11

sip_invite_retx: "6" ; Default 7

timer_invite_expires: "180" ; Default 180 sec



# Setting for Message speeddial to UOne box

#messages_uri: "1571"
#mwi_status : "1"






# TFTP Phone Specific Configuration File Directory

tftp_cfg_dir: "./"



# Time Server

sntp_mode: "unicast"

sntp_server: "10.0.0.11"

time_zone: "GMT"

dst_offset: "1"

dst_start_month: "April"

dst_start_day: ""

dst_start_day_of_week: "Sun"

dst_start_week_of_month: "1"

dst_start_time: "02"

dst_stop_month: "Oct"

dst_stop_day: ""

dst_stop_day_of_week: "Sunday"

dst_stop_week_of_month: "8"

dst_stop_time: "2"

dst_auto_adjust: "1"



# Do Not Disturb Control (0-off, 1-on, 2-off with no user control, 3-on with no user control)

dnd_control: "2" ; Default 0 (Do Not Disturb feature is off)



# Caller ID Blocking (0-disabled, 1-enabled, 2-disabled no user control, 3-enabled no user control)

callerid_blocking: "0" ; Default 0 (Disable sending all calls as anonymous)



# Anonymous Call Blocking (0-disbaled, 1-enabled, 2-disabled no user control, 3-enabled no user control)

anonymous_call_block: "0" ; Default 0 (Disable blocking of anonymous calls)



# Call Waiting (0-disabled, 1-enabled, 2-disabled with no user control, 3-enabled with no user control)

call_waiting: "1" ; Default 1 (Call Waiting enabled)



# DTMF AVT Payload (Dynamic payload range for AVT tones - 96-127)

dtmf_avt_payload: "101" ; Default 100



# XML file that specifies the dialplan desired

dial_template: "dialplan"



# Network Media Type (auto, full100, full10, half100, half10)

network_media_type: "auto"



#Autocompletion During Dial (0-off, 1-on [default])

autocomplete: "0"



#Time Format (0-12hr, 1-24hr [default])

time_format_24hr: "1"



# URL for external Phone Services

services_url: "http://voipfone.co.uk"



# URL for external Directory location

directory_url: ""



# URL for branding logo

#logo_url: "http://10.0.0.11/cisco/aah.bmp"
logo_url: "10-20logo.bmp"


# Remote Party ID

remote_party_id: 1 ; 0-Disabled (default), 1-Enabled

#END