SwissVoice IP10S - Doesnt tear down after Caller hangs up!

#1
Any ideas :?:
I currently have a SwissVoice IP10S which with the standard SIP settings works... except the tear down doesn't seem to occur when someone calls the SIP phone it keeps ringing for aprox 1 minute even though they have long since disconnect.

When removing the outbound proxy settings nat.voipfone.co.uk:5065 this problem is resolved but obviously i am unable to make outbound calls/transfers etc in this mode
Any help or observations appreciated

Thanks in advance
:?:

Some details of the phone model:
Application version IP10 SP v1.0.1 (Build 4)
Boot version IP10 Boot v1.0.9
DSP version Rel 9.1.30.7, p8
GG version R9.03.00 IPP Build 4
IP address 192. 168. 1. 77
Mac address 00:05:90:02:4c:94
Protocol SIP

The SIP Profile looks like this: 123456789 has been used to replace my details =)
########################################
# SIP parameters START
########################################
set sip transport udp
set sip udp_listen_port 5060
set sip tcp_listen_port 5060
set sip registrar_proxy on sip.voipfone.co.uk 5060
set sip outbound_proxy on nat.voipfone.co.uk 5065
set sip register_timeout 3600
set sip refer_timeout 2000
set sip display_name "123456789*200"
set sip compact_header 1
set tcid 0 sip endpoint_name 123456789*200
set tcid 0 sip auth on 123456789*200 138901
########################################
# SIP parameters END
########################################

########################################
# RVCM parameters START
########################################
set rvcm nat_public_addr
set rvcm rtp_port 50000
set rvcm stun_addr
set rvcm nat_disco 0
set rvcm nat_keepalive_to 0
set rvcm CLIP_hidden 0
########################################
# RVCM parameters END
########################################

########################################
# RTP parameters START
########################################
set rtp_prof 0 coding g711_mu 30
set rtp_prof 1 coding g729_ab 40
set rtp_prof 2 coding g711_a 30
set rtp_prof 0 priority 254
set rtp_prof 1 priority 255
set rtp_prof 2 priority 253
set rtp_prof 0 vad on
set rtp_prof 1 vad on
set rtp_prof 2 vad on
set rtp_prof dtmf_relay inb 101
########################################
# RTP parameters END
########################################

########################################
# ATPM parameters START
########################################
atpm req
atpm purge all
atpm sys 180000 30000 30000 00 a
atpm aadd 0 1 26 10 0
atpm aadd 1 1 26 10 0
atpm aadd 2 1 26 10 0
atpm aadd 3 1 26 10 0
atpm aadd 4 1 26 10 0
atpm aadd 5 1 26 10 0
atpm aadd 6 1 26 10 0
atpm aadd 7 1 26 10 0
atpm aadd 8 1 26 10 0
atpm aadd 9 1 26 10 0
atpm aadd * 1 26 10 0
atpm aadd # 1 26 10 0
atpm genlist hunt
atpm done
atpm store
########################################
# ATPM parameters END
########################################

########################################
# ADMIN parameters START
########################################
set utilities sntp_mode local
set utilities sntp_daylightsaving on
set utilities time_format 24h
set utilities date_format 0
set utilities web_activation on
set utilities tone_table EU
set utilities CallList on
set idle_screen phone_number
set language activeLanguage English
set ringtones melodymap 1
########################################
# ADMIN parameters END
########################################

########################################
# PHONE BOOK parameters START
########################################
set telbook CommonTelBookSource Local
set telbook del internal
########################################
# PHONE BOOK parameters END
########################################

########################################
# FUNCTION KEY parameters START
########################################
set functionkey F1 FREE_NUMBER "Joe" "123456789*201" on
set functionkey F2 NONE
set functionkey F3 NONE
set functionkey F4 FUNCTION DND
set functionkey 0 NONE
set functionkey 1 NONE
set functionkey 2 NONE
set functionkey 3 NONE
set functionkey 4 NONE
set functionkey 5 NONE
set functionkey 6 NONE
set functionkey 7 NONE
set functionkey 8 NONE
set functionkey 9 NONE
########################################
# FUNCTION KEY parameters END
########################################

########################################
# TONES parameters START
########################################
set tone nbElem BZ 2
set tone element BZ 1 375 400 -60
set tone element BZ 2 375 0 0
set tone nbElem CG 2
set tone element CG 1 250 480 -240 620 -240
set tone element CG 2 250 0 0
set tone nbElem DL 1
set tone element DL 1 inf 440 -60
set tone nbElem DT 4
set tone element DT 1 250 480 -240 620 -240
set tone element DT 2 250 0 0
set tone element DT 3 250 480 -240 620 -240
set tone element DT 4 inf 0 0
set tone nbElem BDL 3
set tone element BDL 1 100 350 -130 440 -130
set tone element BDL 2 100 0 0
set tone element BDL 3 0 0 0
set tone nbElem OT 2
set tone element OT 1 100 1400 -130 2060 -130 2450 -130 2600 -130
set tone element OT 2 100 0 0
set tone nbElem RO 2
set tone element RO 1 250 480 -240 620 -240
set tone element RO 2 250 0 0
set tone nbElem RT 4
set tone element RT 1 400 400 -60
set tone element RT 2 200 0 0
set tone element RT 3 400 450 -60
set tone element RT 4 2000 0 0
set tone nbElem WT1 2
set tone element WT1 1 300 440 -130
set tone element WT1 2 inf 0 0
set tone nbElem WT2 4
set tone element WT2 1 100 440 -130
set tone element WT2 2 100 0 0
set tone element WT2 3 100 440 -130
set tone element WT2 4 1700 0 0
set tone nbElem WT3 6
set tone element WT3 1 100 440 -130
set tone element WT3 2 100 0 0
set tone element WT3 3 100 440 -130
set tone element WT3 4 100 0 0
set tone element WT3 5 100 440 -130
set tone element WT3 6 1500 0 0
set tone nbElem WT4 6
set tone element WT4 1 100 440 -130
set tone element WT4 2 100 0 0
set tone element WT4 3 300 440 -130
set tone element WT4 4 100 0 0
set tone element WT4 5 100 440 -130
set tone element WT4 6 1300 0 0
########################################
# TONES parameters END
########################################

########################################
# FEATURES parameters START
########################################
set features CFU_ON proto
set features CFU_OFF proto
set features CFR_ON proto
set features CFR_OFF proto
set features CFB_ON proto
set features CFB_OFF proto
set features DND_ON proto
set features DND_OFF proto
set features VOICEMAIL
set features PICKUPCALL proto
########################################
# FEATURES parameters END
########################################

########################################
# IPP parameters START
########################################
set ipp callwaiting 1
########################################
# IPP parameters END
########################################

Who is online

Users browsing this forum: No registered users and 0 guests

Copyright 2004 - 2017, iNet Telecoms® Ltd. All rights reserved.


cron