Linksys 901

1. Find the IP of your device:

Pickup an attached telephone and dial **** 110#, make a note of the numbers which are read out.

2. Visit your 901's configurations page:

Now that you know the IP of your device, type it into a browser on a PC attached to the network. For example Internet Explorer, Mozilla Firefox.
You may need to type in http:// before the IP.

3. Login as an administrator, and view configuration in advanced view

Click the 'Admin Login' button at top right of page, then click 'Switch to advanced view' in the centre of page.

4. Setup the line you wish to use

Click Ext 1 or Ext 2 depending on which line you wish to configure for the Voipfone service. Once you have the page up that you need to configure you need to enter the following information

A: Proxy and Registration;


Use outbound proxy :No

Outbound proxy

Use OB Proxy in Dialog: Yes

Register: Yes

Make Call without Reg: No

Register Expires: 60

Everything else can be left on its defaults in the Proxy and Registration section

B: Subscriber Information

Display Name: Name you wish to have displayed when making calls to other VoIP users

User ID: Your user ID starting 30 and consisting of 8 digits. E.g. 30100000 [for PBX users enter user ID with *200 at the end, where your extension is 200. E.g. 30100000*200]

Password: Your 6 digit Voipfone password. This can be found in your sign up confirmation email. If you're setting up an extension - it's the password for your extension. You can find it here

Use Auth ID: Yes

Auth ID: Same as User ID (see above)

Everything else can be left on its defaults in the Subscriber Information section.

Once this information is entered submit changes by clicking save settings or submit changes at the bottom of the page. Your device should now be working, if not try enabling the outbound proxy. See 4.A above for information on how to do this.

5. Other Settings
To get the best performance out of your device you can edit some of the default settings.

A. Registration Retry Interval

This setting determines how long your device should wait before trying to register again if you lose registration for any reason. To change this value:

Choose SIP tab, under SIP Timer Values (sec) change Reg Retry Long Intvl to 120

B. Regional Settings

The Linksys PAP2T can be set to give regional sounds; by default it has American sounds. The settings can be changed in the Regional Tab. UK settings are as follows:

Call Progress Tones

Dial Tone: 350@-19,440@-19;30(*/0/1+2)
Second Dial Tone 420@-19,520@-19;30(*/0/1+2)
Outside Dial Tone: 420@-16;10(*/0/1)
Prompt Tone: 520@-19,620@-19;10(*/0/1+2)
Busy Tone: 400@-20;10(.375/.375/1)
Reorder Tone: 400@-19;20(*/0/1)
Ring Back Tone: 400@-20,450@-20;*(.4/.2/1+2,.4/2/1+2)
Confirm Tone: 600@-16;1(.25/.25/1)
MWI Dial Tone: 350@-19,440@-19;8(.1/.1/1+2);10(*/0/1+2)
Cfwd Dial Tone: 350@-19,440@-22;10(.75/.75/1+2)
DND Dial Tone: 350@-19,440@-22;10(.80/.75/1+2)
Holding Tone: 600@-19;*(.1/.1/1,.1/.1/1,.1/2.2/1)
Conference Tone: 350@-19;20(.1/.1/1,.1/9.7/1)
Secure Call Indication Tone: 397@-19,507@-19;15(0/2/0,.2/.1/1,.1/2.1/2)
Feature Invocation Tone: 350@-16;*(.1/.1/1)
SIT1 Tone: 985@-16,1428@-16,1777@-16;20
SIT2 Tone: 914@-16,1371@-16,1777@-16;20
SIT3 Tone: 914@-16,1371@-16,1777@-16;20
SIT4 Tone: 985@-16,1371@-16,1777@-16;20
Off Hook Warning Tone: 480@-10,620@-16,1400@0,2060@0,2450@0,2600@0;60

Distinctive Ring Patterns

Ring Cadence 1: 60(.4/.2,.4/2)


Caller ID Method: ETSI FSK With PR (UK)

C. Dial Plans

Dial plans allow you to customise how numbers are dealt with when you make a call. You can apply the dial plan at the bottom of 'Line 1' or 'Line 2'
A simple recommended dial plan for use on our service can be found at this link:

Voipfone Customer Services

iNet Telecoms Ltd (Voipfone)
Sovereign House
227 Marsh Wall
E14 9SD
United Kingdom

Registered number: 05168033
Vat Registration Number 858850966

Telephone: 020 7043 5555
Fax: 020 7043 5556


Who is online

Users browsing this forum: No registered users and 1 guest

Copyright 2004 - 2017, iNet Telecoms® Ltd. All rights reserved.