These settings have been donated by Henry - many thanks


Got it working at last Very Happy

With some assistance from Voipfone tech support, we decided to DISABLE the outbound proxy... now works fine behind my Linksys WAG54G:

# Outbound Proxy info

outbound_proxy: "UNPROVISIONED"

outbound_proxy_port: ""

To help others, these are my complete (and now working config files for my Cisco 7940) I'm pretty sure that they will also work for the Cisco 7960.

Hope this helps others, Henry

___________________________
THIS FILE NEEDS TO BE CALLED SIP123456789A12.cnf WHERE 123456789A12 IS YOUR CISCO PHONES MAC ADDRESS

CONFIG FOR SIP 8.2
___________________________

# SIP Phone Specific Configuration File for Cisco 7940 For MAC Address 123456789A12 (start)
# Voipfone Tel: xxxxx xxxxxx



# Line 1 Settings

line1_name: "your user id" ; Line 1 Extension\User ID

line1_displayname: "your name" ; Line 1 Display Name

line1_authname: "your user id" ; Line 1 Registration Authentication

line1_password: "your password" ; Line 1 Registration Password

line1_shortname: "your name"



# Line 2 Settings

line2_name: "UNPROVISIONED" ; Line 2 Extension\User ID

line2_displayname: "UNPROVISIONED" ; Line 2 Display Name

line2_authname: "UNPROVISIONED" ; Line 2 Registration Authentication

line2_password: "UNPROVISIONED" ; Line 2 Registration Password

line2_shortname: "UNPROVISIONED"



# Phone prompt/password for telnet/console session

phone_prompt: "Cisco 7940" ; Telnet/Console Prompt

phone_password: "cisco" ; Telnet/Console Password



# Phone Label (Text desired to be displayed in upper right corner)

phone_label: "Voipfone " ; Has no effect on SIP messaging


# SIP Phone Specific Configuration File for Cisco 7940 For MAC Address 123456789A12 (end)


___________________________
THIS FILE NEEDS TO BE CALLED SIPDefault.cnf

CONFIG FOR SIP 8.2
___________________________


# SIP Generic Configuration File For CISCO 7940 (start)
# Voipfone



# Image Version

image_version: "P0S3-08-2-00"



# Proxy Server info

proxy1_address: "sip.voipfone.co.uk"

proxy1_port:"5060"

proxy_register : 1



# Outbound Proxy info

outbound_proxy: "UNPROVISIONED"

outbound_proxy_port: ""



# Emergency Proxy info

proxy_emergency: ""

proxy_emergency_port: ""



# Backup Proxy info

proxy_backup: ""

proxy_backup_port: ""



# NAT/Firewall Traversal

nat_enable: "1"

nat_address: "nat.voipfone.co.uk"

nat_received_processing: "1"

voip_control_port: "5065"

start_media_port: "16384"

end_media_port: "32766"



# Time Zone phone will reside in

time_zone: GMT



# Setting for Message speeddial to UOne box

messages_uri: "1571"

mwi_status : "1"



# Phone Registration Expiration [1-3932100 sec] (Default - 3600)

timer_register_expires: "60"



# Codec for media stream (g711ulaw (default), g711alaw, g729)

preferred_codec: "g711alaw"



# TOS bits in media stream [0-5] (Default - 5)

tos_media: "5"



# Enable VAD (0-disable (default), 1-enable)

enable_vad: "0"



# Allow for the bridge on a 3way call to join remaining parties upon hangup

cnf_join_enable: "1" ; 0-Disabled, 1-Enabled (default)



# Allow Transfer to be completed while target phone is still ringing

semi_attended_transfer: "0" ; 0-Disabled, 1-Enabled (default)



# Telnet Level (enable or disable the ability to telnet into this phone

telnet_level: "2" ; 0-Disabled (default), 1-Enabled, 2-Privileged



# Inband DTMF Settings (0-disable, 1-enable (default))

dtmf_inband: "1"



# Out of band DTMF Settings (none-disable, avt-avt enable (default), avt_always - always avt )

dtmf_outofband: "avt"



# DTMF dB Level Settings (1-6dB down, 2-3db down, 3-nominal (default), 4-3db up, 5-6dB up)

dtmf_db_level: "3"



# SIP Timers

timer_t1: "500" ; Default 500 msec

timer_t2: "4000" ; Default 4 sec

sip_retx: "10" ; Default 11

sip_invite_retx: "6" ; Default 7

timer_invite_expires: "180" ; Default 180 sec



# TFTP Phone Specific Configuration File Directory

tftp_cfg_dir: "./"



# Time Server

sntp_mode: "unicast"

sntp_server: "10.0.0.11"

time_zone: "GMT"

dst_offset: "1"

dst_start_month: "April"

dst_start_day: ""

dst_start_day_of_week: "Sun"

dst_start_week_of_month: "1"

dst_start_time: "02"

dst_stop_month: "Oct"

dst_stop_day: ""

dst_stop_day_of_week: "Sunday"

dst_stop_week_of_month: "8"

dst_stop_time: "2"

dst_auto_adjust: "1"



# Do Not Disturb Control (0-off, 1-on, 2-off with no user control, 3-on with no user control)

dnd_control: "2" ; Default 0 (Do Not Disturb feature is off)



# Caller ID Blocking (0-disabled, 1-enabled, 2-disabled no user control, 3-enabled no user control)

callerid_blocking: "0" ; Default 0 (Disable sending all calls as anonymous)



# Anonymous Call Blocking (0-disbaled, 1-enabled, 2-disabled no user control, 3-enabled no user control)

anonymous_call_block: "0" ; Default 0 (Disable blocking of anonymous calls)



# Call Waiting (0-disabled, 1-enabled, 2-disabled with no user control, 3-enabled with no user control)

call_waiting: "1" ; Default 1 (Call Waiting enabled)



# DTMF AVT Payload (Dynamic payload range for AVT tones - 96-127)

dtmf_avt_payload: "101" ; Default 100



# XML file that specifies the dialplan desired

dial_template: "dialplan"



# Network Media Type (auto, full100, full10, half100, half10)

network_media_type: "auto"



#Autocompletion During Dial (0-off, 1-on [default])

autocomplete: "0"



#Time Format (0-12hr, 1-24hr [default])

time_format_24hr: "1"



# URL for external Phone Services

# services_url: "http://192.168.1.21/phone/news.htm" ; News Feed Services

services_url: "http://voipfone.co.uk"



# URL for external Directory location

directory_url: "http://192.168.1.21/phone/directory.htm " ; Phone Directory



# URL for branding logo

# logo_url: "http://10.0.0.11/cisco/aah.bmp"

# logo_url: "10-20logo.bmp"



# Remote Party ID

remote_party_id: 1 ; 0-Disabled (default), 1-Enabled



# SIP Generic Configuration File For CISCO 7940 (end)